关闭
Product Center
Product Detail

Product Introduction

Our high-performance diesel excavator for coal mines is a hydraulic excavator specifically designed for underground mining operations. It performs exceptionally well in tasks such as road maintenance, drainage ditch excavation, cinder cleaning, debris removal, and surface leveling. Its compact design is made of sturdy materials and components, capable of withstanding extreme underground environments and ensuring outstanding mobility in confined Spaces. This machine can achieve 360° full rotation within the minimum cross-sectional area and simultaneously perform multiple functions such as excavation, leveling, lateral excavation, rock crushing and material handling. It effectively handles challenging tasks, including rough trenching, cinder removal, waste management and road surface treatment.


The upper frame can rotate 360° without any restrictions and is used for excavation and crushing operations beneath the conveying system. Its articulated working arm facilitates unobstructed crushing and excavation throughout the entire working range at different heights within the mine road. The front-mounted adjustable bulldozer blade can enhance the stability of the machine during operation and support precise grading. The key hydraulic pipelines on both sides of the working arm are protected by spring-reinforced protective sleeves to ensure the integrity of the hoses under harsh conditions.

The excavator adopts an intelligent load-sensing hydraulic system, which automatically synchronizes the pump pressure with the operational requirements while maintaining precise load speed control. This technology represents the cutting-edge of water conservancy engineering in contemporary construction equipment.

This device is equipped with an air-start ignition system that can be quickly activated in cold weather and is supplemented by an advanced washer exhaust treatment system. This emission control technology converts harmful engine exhaust into non-toxic gases, significantly improving the air quality in underground working Spaces.

项目

单位MWD6/0.3L
工作体的结构形式/三段式臂
辅助臂旋转角度°±90°
电机功率千瓦45

液压系统
额定压力MPA23.5
主泵流量升/分钟130
液压泵的类型/可变排量泵
行走的驾驶方式/集成液压马达减速机驱动

行走机构
步行形式/履带式行驶
比对地压力MPA≤0.1
行驶速度公里/小时0-3.5
离地间隙毫米300
攀爬能力°15
摆动角度°360
挥杆速度转/分钟0-10
履带式/钢履带
全履带长度毫米2450
履带宽度毫米400

铲斗装载
桶容量立方米0.3
挖掘半径毫米4800
最大仰角臂高度毫米5200
最大排放高度毫米3830
最大挖掘深度毫米2500
尾部摆动半径毫米1550
铲斗挖掘力KN35
公称工作压力MPA9-12

液压破碎锤
作流程升/分钟25~50
冲击频率转速600-1100
冲击能量J350
合适的钎焊工具规格毫米53
噪声分贝(A)≤120
推土机铲刀宽度*H毫米1600×370
整体外形尺寸(长*宽*高)毫米电话:3500×1600×2350
重量t6.2

Copyright © 2025 Shandong Hemei Heavy Industry Co., Ltd. All rights reserved.  Sitemap ICP:© 2025 Shandong Hemei Heavy Industry Co., Ltd.

在线客服